Відео

Well done!

My mosfet just heated up and not a single arc at the output

👍👍👍👍💪💪💪❤️👍👏👏👏

Thank you!

The homopolar motor is 1. not homopolar. All field lines connect. 2. There is counter EMF, but you will never see it unless you a. increase field strength b. Spin the rotor much faster, and c. use larger diameter. Now look at his setup... The frame is antimagnetic, and though current flows through the arms, the flux is very weak in this area. That flimsy copper tape is obviously not being pushed on. The rotating magnet provides the field, but the field CANNOT turn. Here's why. ua-cam.com/video/Kl0-sKbZsKM/v-deo.html . But still more astounding... where is the torque reaction? What happened to Newton. I am building a little circuit so I can turn on current with a beam of light. Then I will suspend the whole motor but with a vertical axis. You get it. Lucid, I hope you still read your comments. Your video was one I saw during my own confirmatory experiments, and I am in your debt.

And here is why the field does not turn with the magnet. ua-cam.com/video/Kl0-sKbZsKM/v-deo.html

You did a great job by lightning a single LED using 1 piezoelectric

Thanks, brother, for explaining the concept

Thank you so much for this video.

طالبه سادس خارجي مرت من هنا لكي تفهم طريقه هيرتز في توليد شراره من العراق ❤❤❤❤❤

Dear can you please confirm whether the output of your flyback transformer is a sine wave or rectified DC pulse when applying pwm stream using MOSFET. Some flyback transformers come with a High voltage diode hidden inside the anode connection.

Thank you sir

Can I use 9 volt instead of 6 volts ??

5:48 No need I think. Simply connecting that green wire to the other pin of capacitor will make the rotor move the opposite direction. Not sure if this is applicable for this polarized capacitor. I would only suggest using non polarised ones.

The best part might be the protective diode for the SCR parallel to the coil. Thanks for that. I like you PCB technique.

👍👍👍

Great demo. Thanks

7:20 your description is wrong, it should turn transistor on then while the magnet not cross the coil the transistor is turn off, repeat on off make it rotate

Add a feedback winding and a capacitor across the primary winding. The circuit self oscillates at the resonant frequency and the capacitor stops the mosfet from blowing up if the seckndary is open circuit.

Thank you, very useful might use this for my project 😁

Which transistor used in this

MY DUCKING EARS

Thank you for sharing

5/5 مراجعة فيزياء 😭😂

What are the materials used?

What kinds of OH can react with Al (or other metal) only in higher temperature like 200degree Celcius?

How can i twist something 90 degrees on and 90 degrees off?

worked

Could this reliably be used as a latch circuit?

Il à pas inventé le file à coupé le beurre 😅😅😅😅😅😅 un électro ordinaire 😅😅😅😅

All foods have a tiny amount of magnetism and its nothing to do with them being magnetic like steel.

Shouldn't the top of the engine cool? Maybe use aluminium tape instead of duct tape.

May I know the materials used?? We need it for our Performance task

I always wonder, why they taught me binary logic I almost never use in real life? It is 60 years obsolete.

Thrusting good

If you want aluminum air then mix some graphite and a little iron oxide with the cathode paste and use an iron mesh to hold it with. Also if you use sodium bicarbonate mixed with NaOH it will work a bit better.

clock based on this please?

Brilliant, makes it easy to visualise what is going on 👍👍

It's very cool to see how these binary digital circuits can be built with relays. Excellent video!!!

interesting concept

Awesome circuit. Good job!

What a beautiful baby. Congrats.

outstanding video

I love you❤

Make high voltage using dc 547transistor

കമ്പ്യൂട്ടറുകൾ മുൻപ് കണ്ടെത്തിയില്ലായിരുന്നുവെങ്കിൽ 2024 ലിൽ നിങ്ങൾ കണ്ടെത്തും എന്ന് ഉറപ്പായി

Best project

How much advertising?

i have made the same ,the ball is not rotating but the spark is happening , why ? please reply

What is the voltage of your bulb sorry im a newbie